Study the Field of View Influence on the Monchromatic and Polychromatic Image Quality of a Human Eye

Adeeb Mansoor Qasim - Computer Science Department, AL-Salam University College, Hay AL-khadra’a, Baghdad, 10022, Iraq
Mohammad Aljanabi - Computer Science Department, AL-Salam University College, Hay AL-khadra’a, Baghdad, 10022, Iraq
Shahreen Kasim - Faculty of Computer Science and Information Technology, Universiti Tun Hussein Onn Malaysia (UTHM), Address, Johor, 86400, Malaysia
Mohd Arfian Ismail - Faculty of Computing, College of Computing and Applied Sciences, Universiti Malaysia Pahang, Malaysia
Taufik Gusman - Department of Information Technology, Politeknik Negeri Padang, Sumatera Barat, Indonesia


Citation Format:



DOI: http://dx.doi.org/10.30630/joiv.6.1-2.931

Abstract


In this paper, the effect of the eye field of view (known as F.O.V.) on the performance and quality of the image of the human eye is studied, analyzed, and presented in detail. The image quality of the retinal is numerically analyzed using the eye model of Liou and Brennan with this polymer contact lens. The image, which is in digital form were collected from various sources such as from photos, text structure, manuscripts, and graphics. These images were obtained from scanned documents or from a scene. The color fringing which is chromatic aberration addition to polychromatic effect was studied and analyzed. The Point Spreads Function or (known as PSF) as well as The Modulation Transfers Function (known as MTF) were measured as the most appropriate measure of image quality. The calculations of the image quality were made by using Zemax software. Then, the result of the calculation demonstrates the value of correcting the chromatic aberration. The results presented in this paper had shown that the form of image is so precise to the eye (F.O.V.). The image quality is degraded as (F.O.V.) increase due to the increment in spherical aberration and distortion aberration respectively. In conclusion, then Zemax software that was used in this study assist the researcher potential to design human eye and correct the aberration by using external optics.


Keywords


Eye models; point spread function; modulation transfer function; aberration.

Full Text:

PDF

References


A. José Díaz, “Optical Design Techniques in Current Eye models Development Optical Design Techniques in Current Eye Models Development,†2017.

A. David and E. Optometry, “http://eprints.qut.edu.au/103119/,†2016.

M. Almeida and L. Carvalho, “Different schematic eyes and their accuracy to the in vivo eye: a quantitative comparison study,†Brazilian J. Phys., vol. 37, no. 2, pp. 378–387, 2007.

H.-L. L. and N. A. Brennan, “Anatomically accurate, finite model eye for optical modeling,†vol. 14, no. 8, pp. 1684–1695, 1997.

Y. L. Ã, Z. Wang, L. Song, and G. Mu, “An anatomically accurate eye model with a shell-structure lens,†vol. 116, pp. 241–246, 2005.

Ali.H.Alhamdani, R. A.Madlool, and M. R. Abdul-Hussein, “Optical modeling and analysis of polyurethane lens for correcting presbyopia by using Zemax program,†J. Univ. Kerbala, vol. 16, no. 1, 2018.

H. Al-hamdani Ali, “Design and Performance Analysis of Contact Lens Materials for Chromatic and Polychromatic Aberrations Correction,†Eng. Technol. J., vol. 36, no. 9, pp. 1016–1021, 2018.

T. Edward Bope MD and D. Rick Kellerman MD, “Diseases of the Head and Neck,†in CONN’S Current Therapy, Elsevier, 2015, p. 346.

T. N and P. S, “A Data Mining Approach for Parameter Optimization in Weather Predictionâ€, Int. J. Data. Science, vol. 1, no. 1, pp. 1-13, Apr. 2020.

E. Nathan, “Historical perspective,†in Contact Lens Practice, 2nd ed., Elsevier Limited, 2010, p. 5.

A. H. Alhamdani, H. H. Al-aaraji, M. R. Abdul-hussein, and A. Rajaa, “Borosilicate and Polyurethane as Materials for Lenses to Correct Human Presbyopia Borosilicate and Polyurethane as Materials for Lenses to Correct Human Presbyopia,†IOP Conf. Ser. J. Phys. Conf., vol. 1032, pp. 1–6, 2018.

R. Vinny Sastri, “High-Temperature Engineering Thermoplastics: Polysulfones, Polyimides, Polysulfides, Polyketones, Liquid Crystalline Polymers, and Fluoropolymers,†in Plastics in medical devices : properties, requirements and applications, 2010, p. 178.

D. Putra, D. Fernandez, & -. Wagino "Optimization of Digital Image Processing Method to Improve Smoke Opacity Meter Accuracy," JOIV: International Journal on Informatics Visualization, vol. 2, no. 2,, pp. 88 - 91, Mar. 2018.

S. BÈumer, Hand Book of Plastic Optics. Wiley-VCH Verlag GmbH & Co. KGaA, 2005.

H. Al-hamdani Ali, S. Mohammed Mahdi, and M. Abd Kasim, “Point Spead Function for Optical System with Non-Uniform Transmission Pupil and Different Aberration Functions,†Iraqi J. Scince, vol. 41C, no. 1, 2000.

H. Al-hamadani Ali and S. Karam Ghada, “Apodization Defocused Optical Imaging System with Different Apertures using Hanning Amplitude Filter,†Adv. Phys. Theor. Appl., vol. 68, no. 2, pp. 5–11, 2017.

H. Al-hamadani Ali, S. Zainulabdeen Faten, and S. Karam Ghada, “Effects of atmospheric turbulence on the imaging performance of optical system Effects of Atmospheric Turbulence on the Imaging Performance of Optical System,†Technol. Mater. Renew. Energy, Environ. Sustain., vol. 030071, no. 1, pp. 030071-8, 2018.

W. Joseph Goodman, Introduction to Fourier Optics, 3rd ed. Roberts and Company, 2005.

C. wynat James and N. Kathrine, “Basic wavefront Abberation theory for Optical Metrology,†in Applied Optics and Optical Engineering, Academic Press, Inc.

H. Al-hamadani Ali, Y. Sundus Hassen, and S. Sami Chiad, “A Noval Zernike Polynamial for Optical System with Square Aperture,†J. Coll. Educ., no. 1, pp. 393–396, 2008.

H. Al-hamadani Ali and S. Y. H. Al Asadi, “Zernike Polynamial for Optical System with Horizantal Rectangular Aperture,†IBN AL-Haitham J.for Pure Appl. Sci., vol. 21, no. 3, pp. 51–59, 2008.

G. Dai, Wavefront Optics for Vision Correction. Bellingham, Washington: SPIE, 2007.

Y. Seki, T. Kawamorita, N. Yamamoto, T. Tanigawa, N. Mita, N. Hatsusaka, E. Kubo , H. Sasaki, "Analyzing Effect of Waterclefts on Visual Functions Via Optical Simulations", Invest Ophthalmol Vis Sci, vol. 63, no. 2, 2022.

Y. Jia, O. Tan, J. Tokayer, B. Potsaid, Y. Wang, J. Liu, M. Kraus, H. Subhash, J. Fujimoto, J. Hornegger, and D. Huang, "Split-spectrum amplitude-decorrelation angiography with optical coherence tomography," Opt. Express, vol. 20, pp. 4710-4725, 2012.

P. Omidi, A. Cayless, A. Langenbucher, "Simulation of photic effects after cataract surgery for off-axis light sources", PLOS ONE, vol. 17 no. 1, 2022.

Y. Xincheng, S. Taeyoon, M. Jiechao, "Developing portable widefield fundus camera for teleophthalmology: Technical challenges and potential solutions", Experimental Biology and Medicine, vol. 241, no. 4, pp. 289-299, 2022.

M. Vinas-Pena M, A. de Castro, C. Dorronsoro, A. Gonzalez-Ramos, S. Redzovic, N. Willet, N. Garzon, S. Marcos, "Understanding In Vivo Chromatic Aberrations in Pseudophakic Eyes Using on Bench and Computational Approaches", Photonics, vol. 9, no. 4, pp. 226, 2022.

S. Yusuke, K. Takushi, Y. Naoki, T. Takashi, M. Norihiro, H. Natsuko, K. Eri, S. Hiroshi , "Analyzing Effect of Waterclefts on Visual Functions Via Optical Simulations", Invest. Ophthalmol. Vis. Sci., vol. 63, no. 2, 2022.

M. Simpson, "Nodal points and the eye," Appl. Opt., vol. 61, pp. 2797-2804, 2022.

Z. Xuehui, C. Jun, Z. Wenchao, W. Dajiang, C. Weilin, C. Jiajing, "Optical Design of a Snapshot Nonmydriatic Fundus-imaging Spectrometer Based on the Eye Model", Curr. Opt. Photon, vol. 6, pp. 151-160, 2022.

T. Tokuhisa, T. Watanabe, A. Watanabe, T. Nakano, "Refractive error induced by intraocular lens tilt after intrascleral intraocular lens fixation"". Int Ophthalmol, vol. 42, pp. 1213–1220, 2022.

Y. Chih-Ta, J. Shih-Cyuan, "Freeform Surface Lens Design Using Genetic Algorithm with Acrylic Material for Reducing Aberrations in Multifocal Artificial Intraocular Lens to Enhance Image Sensing Quality", Sensors and Materials, vol. 34, no. 1, pp. 187–201, 2022.