Design and Develop an Autonomous UAV Airship for Indoor Surveillance and Monitoring Applications

Hairol Nizam Mohd Shah - Universiti Teknikal Malaysia Melaka, Malaysia.
Mohd Zamzuri Ab Rashid - Universiti Teknikal Malaysia Melaka, Malaysia.
Zalina Kamis - Universiti Teknikal Malaysia Melaka, Malaysia.
Mohd Shahrieel Mohd Aras - Universiti Teknikal Malaysia Melaka, Malaysia.
Nursabillilah Mohd Ali - Universiti Teknikal Malaysia Melaka, Malaysia.
Faizil Wasbari - Universiti Teknikal Malaysia Melaka, Malaysia
Mohd Nor Fakurazy Bin Abu Bakar - Universiti Teknikal Malaysia Melaka, Malaysia.


Citation Format:



DOI: http://dx.doi.org/10.30630/joiv.2.1.33

Abstract


This project is about to develop an airship based on small size remotely controlled by human. The airship is one of Unmanned Airship Vehicle (UAV) which is can be apply in advertising, VIP security inspection, traffic monitoring and management and so on. The main purpose of this project is to design and develop an autonomous UAV airship for indoor surveillance and monitoring applications. The image will be captured from wireless camera where it mounted at a bottom of gondola. To determine the centroid points of the object are implemented in three phase edge detector, canny operator and threshold. The object will be display on Graphical User Interface (GUI) in 2D coordinated. In this project the systems able to detect only one object at one time.

Keywords


canny operator, graphical user interface (GUI), object detection, edge detector

Full Text:

PDF

References


Silvio M. Maeta, Samuel S. Bueno, Luiz G. Mirisola. “ Development of a VRML/Java Unmanned Airship Simulating Environment “.Journal.

Marcel Bergerman, Samuel Siqueira Bueno, Alberto Elfes “ A Semi-Autonomous Robotic Airship for Environmental Monitoring Mission “ Journal.

Wikipedia, flight control http://en.wikipedia.org/wiki/flight_control_theory

Yu Liu and Yueming Hu “ Stability and Control Analysis Based on Airship Dynamic Modeling “ Journal.

EAI Specifications: http://www.vrml.org/

WorkingGroups/vrml-eai/Specification

Pospisilik Martin & Adamek Milan. “Autonomous Airship as a Surrounding Monitor†Seminar ASR 2007 Instrument and Control (2007)

M Sulaiman, HNM Shah, MH Harun, WT Lim and MNFM Kazim. A 3D Gluing Defect Inspection System Using Shape-Based Matching Application from Two Cameras. International Review on Computers and Software (IRECOS ). 2013, 8(8), pp. 1997–2004.

Sulaiman, M., Shah, M. H. N., Harun, M. H., and Kazim, M. N. F. M. Defect Inspection System For Shape-Based Matching Using Two Cameras. Journal of Theoretical and Applied Information Technology (JATIT). 2014, 61(2), pp. 288–297.

MH Harun, M Sulaiman, HNM Shah, and WT Lim, “Shape – Based Matching: Defect Inspection of Glue Process in Vision Systemâ€, Conference on Industrial Electronics and Applications (ISIEA), IEEE, pp. 53-57, 2011.

HNM Shah, M Sulaiman, AZ Shukor, MZA Rashid. Recognition of Butt Welding Joints using Background Subtraction Seam Path Approach for Welding Robot. International Journal of Mechanical & Mechatronics Engineering. 2017, 17(01), pp. 57-62.

HNM Shah, M Sulaiman, AZ Shukor . Autonomous detection and identification of weld seam path shape position. 2017. pp 1-9.

MH Harun, M Sulaiman, HNM Shah, LW Teck. Shape-based matching: Defect inspection of glue process in vision system. IEEE Symposium on Industrial Electronics and Applications (ISIEA).2011. pp. 53-57.

WT Lim, M Sulaiman and HNM Shah , “Flexible Approach For Region Of Interest Creation For Shape-Based Matching In Vision Systemâ€, Conference on Innovative Technologies in Intelligent Systems and Industrial Applications, IEEE, pp. 205-208, 2009.

WT Lim, M Sulaiman, HNM Shah. Shape-Based Matching: Defect Inspection of lue Process in Vision System. IEEE Symposium on Industrial Electronics and Applications. 2011.

HNM Shah, M Sulaiman, SNS Salim. Fuzzy Logic Approach for Mobile Robot in Intelligent Space. Journal-The Institution of Engineers. 2007.68.pp. 38-45

HNM Shah, M Sulaiman, MZA Rashid, Z Kamis, NM Ali, MSM Aras, F Wasbari, Z Omar. A 3D Mapping of the Surrounding Object using Stereo-Vision Technique. International Journal of Soft Computing. 2017, 12(1), pp. 59-65.

HNM Shah, MZA Rashid, MF Abdollah, MN Kamarudin, Z Kamis, A Khamis. Detection of Mobile Object in Workspace Area. International Journal of Signal Processing, Image Processing and Pattern Recognition. 2016. 9(4). pp. 225-232.

WT Lim, M Sulaiman, HNM Shah, R Omar, “Implementation of Shape–Based Matching Vision System in Flexible Manufacturing Systemâ€, Journal of Engineering Science and Technology Review, Vol. 3, No 1, pp. 128- 135, 2011

HNM Shah, M Sulaiman, AZ Shukor, MZA Rashid, MH Jamaluddin. “Review Paper on Vision Based Identification, Detection and Tracking of Weld Seams Path in Welding Robot Environment,†Modern Applied Science, Vol. 10, No 2, pp. 83–89, 2016.

HNM Shah, M Sulaiman, AZ Shukor, MZA Rashid. Recognition of Butt Welding Joints using Background Subtraction Seam Path Approach for Welding Robot. International Journal of Mechanical & Mechatronics Engineering. 2017, 17(01), pp. 57-62.

MH Harun, M Sulaiman and HNM Shah. Shape Based Matching: Application of Defect Detection. Malaysian Technical Universities International Conference on Engineering & Technology (MUCEET). 2011.

HNM Shah, MZA Rashid, YT Tam, “Develop and Implementation of Autonomous Vision Based Mobile Robot Following Humanâ€, International Journal of Advanced Science and Technology, Vol. 51, No 2, pp. 81-91, 2013.

HNM Shah, MZA Rashid, NMM Sobran. Autonomous Mobile Robot Vision Based System: Human Detection by Color. Journal of Theoretical and Applied Information Technology. 2013. PP. 1-7.

HNM Shah, MZA Rashid, MF Abdollah, MN Kamarudin, Z Kamis, A Khamis. Detection of Mobile Object in Workspace Area. International Journal of Signal Processing, Image Processing and Pattern Recognition. 2016, 9(4), pp. 225-232.

HNM Shah, MZA Rashid, Z Kamis, MN Kamarudin, MF Abdollah, A Khamis. Implementation of Object Recognition Based on Type of Vehicle Entering Main Gate. Indonesian Journal of Electrical Engineering and Computer Science. 2016, 3(2).

MH Harun, M Sulaiman and HNM Shah . Shape-Based Matching: Application of Defect Detection. In: Proceedings of Malaysian Technical Universities International Conference on Engineering and Technology. 2011.

MH Harun, M Sulaiman and HNM Shah. Shape-Based Matching: Application of Edge Detection Using Harris Point. International Conference on Robotic Automation System. 2011. pp. 1-5.